top of page

Flight mode​

To comply with regulations for safe flight, your Derek data tracking device comes with a flight mode feature. Learn more below.

In this article: 

Your Derek device comes with a flight mode option that should be turned on if the device comes within areas with restrictions on mobile GSM signals.

What is flight mode and when to use it?

​What does flight mode do

Flight mode is used to suppress any radio transmission in a defined period with a specified start and end date and time. 

​

This means any scheduled transmissions will be skipped in this period. Once the flight mode period is over, the device will continue to transmit according to its next scheduled transmission. 

​

So what flight mode does is only turn off the GSM module in your device.

Set up flight mode​

It is a straightforward process to set up flight mode.

​

Navigate to your device, click Edit. Scroll to Flight mode and select the date and time for Flight mode start and subsequently for Flight mode end. 

​

Remember to activate the Flight mode switch when you are done. 

​

Note: For safety reasons, in case of any delays to the flight, your device will remain in flight mode for 20 hours after the end time you configured.

​

(Flight mode can be configured for several devices at once. See Multi-edit)

How do I set up flight mode
Important things to keep in mind when using flight mode

​Important to keep in mind

Your device will still log all sensor data such as motion, tilt, and impacts along with temperature and humidity data.

​

The only thing that is turned off is the antenna – much like your mobile phone.

Flight mode status

While your flight mode configuration is saved in real-time on the Derek Data Portal, it still needs to be downloaded to your device.

​

This happens automatically upon the first coming transmission of the device after your configuration.

​

That is why we always recommend setting up flight mode in good time before your flight.

​

Once flight mode is ordered, the device will shut down its antennas in the interval you have specified.

​

When enabled, you can see the flight mode status of your device on a new tile in the device view.

​

The status is one of the following three

The status of flight mode in my device

Flight mode ordered

Flight mode has been configured by the user, but the configuration has not yet been sent to the device.

​Flight mode configured

A flight mode configuration has been sent to the device, but it is not yet active.

​Flight mode active

The device is currently in Flight mode and all transmissions will be suppressed.

Note 1: The actual time of day for start and end may vary up to 1 hour before start and up to 1 hour after end.

​

Note 2: The configuration will be sent to the device(s) next time the device(s) communicate with the server – e.g. when activating the device with a magnet.

bottom of page